When you consider system requirements for CAD software like AutoCAD, most of us forget an important factor, i.e., the monitor.
All the high-end system boils down to what you see on the screen. If the screen isn’t up to mark, then your high-end system might feel like a downer.
Keeping this scenario in mind, we’ve listed the 7 Best Monitor for AutoCAD that offers exceptional color accuracy, higher resolution, and sturdy built quality.
Top 3 Best Monitor for AutoCAD
|Best Overall||Best Overall||BenQ PD2700U||
||Check Today’s Price|
|Best Viewsonic||Best Viewsonic||Viewsonic VP2768a||
||Check Today’s Price|
|Best Affordable||Best Affordable||Asus ProArt PA278QV||
||Check Today’s Price|
7+ Best Monitor for AutoCAD in 2022
1. BenQ PD2700U – Best Overall
The BenQ PD2700U is a featured-packed monitor, ideal for computer aided design work. It has a 27-inch screen with 4K native resolution, which means it looks exceptionally sharp, and it’s hard to notice any pixels even at a very close distance.
Being a monitor targeted towards graphic designers and video professionals, the BenQ PD2700U has essential features like 100% sRGB and Rec.709 color space coverage. Moreover, it has a 1300:1 contrast ratio with an 8 bit + FRC panel. On top of that, this panel also supports HDR10 and high brightness of 350 nits.
Out of the box, this monitor is straightforward to set up. It has a height-adjustable monitor stand that supports tilt, swivel, and pivot ergonomic adjustments. The thick bottom bezel looks odd in portrait mode but gets the job done very well.
The BenQ PD2700U comes with an IPS panel offering a 178° viewing angle. IPS panels offer vibrant colors; however, more than required vibrancy can hinder color accuracy. Hence why each unit of BenQ PD2700U is factory calibrated before it is shipped.
The factory calibration report is present within the box, and you can quickly check your monitor’s performance. For this reason, it has a Delta E value of less than 3, which means the colors produced by the monitor deviate very little from true colors.
Suppose you plan to use this monitor during night times and in night mode. In that case, you must know that this monitor has light bleed issues, which can hinder uniformity.
Connectivity-wise, this monitor comes with 1x HDMI 2.0, 1x DisplayPort 1.4, 1x mini-DisplayPort 1.4, 1x DisplayPort out, 2x USB 3.0 Type-B port, 4x USB 3.0 Type-A port and a 3.5mm headphone jack.
One unique feature about this monitor is that it comes with DualView mode. This mode splits the screen into two parts, and with the other part you can compare between several color modes like sRGB, Rec.709, CAD/CAM, Blue Light Filter, etc.
With the CAD/CAM mode, you can effortlessly compare how the colors deviate between the sRGB mode and CAD/CAM mode. This particular feature makes BenQ PD2700U the best monitor for AutoCAD.
- High pixel density
- Plenty of ergonomic adjustments
- Reasonable price
- Comes with ambient sensor for automatic screen brightness adjustment
- Built-in CAD/CAM color mode
- IPS bleed issue is noticeable
- The thick bottom bezel plus the chunky ambient light sensor unit looks a bit odd in portrait mode
“While looking for the best CAD monitor, it’s hard to go wrong with the BenQ PD2700U. It has a big screen, 4K resolution, and a color-accurate display. As a result, you’ll get superb performance without burning a hole in your pocket.”
2. Viewsonic VP2768a– Best Viewsonic Monitor for CAD
The Viewsonic VP2768a is aimed at video professionals, photographers, and graphic designers. Hence, there’s no way this monitor won’t work for CAD users and, more specifically, for AutoCAD software.
This monitor has accurate color reproduction and boasts its uniformity performance making it one of the best color grading monitor. As a result, you’ll hardly notice backlit bleed while using this monitor during nighttime.
On the design front, the Viewsonic VP2768a looks stunning. It has very thin bezels, and they’re present on all 4 sides. In competing monitors, the bottom bezel is comparatively thicker and accommodates the brand’s logo. However, for this monitor, Viewsonic has done away with its logo; therefore, the design looks very clean.
The monitor frame is supported by a sturdy and easy-to-use monitor stand and base. Attaching the monitor to the stand is very simple, and you can also remove it with a push of a button. The stand offers ergonomic adjustments like tilt, swivel, height, and pivot. Moreover, the adjustments are very smooth, and there’s hardly any hindrance.
Connectivity is an important factor for CAD monitors, and the Viewsonic VP2768a comes with plenty of options. You get 1x HDMI 1.4 port, 1x DisplayPort in, 1x DisplayPort out (DaisyChain), 2x USB 3.0 Type-A ports, 1x USB 3.0 Type-B port, 1x Ethernet port and 1x 65W USB Type-C port. However, a 3.5mm headphone jack is missing, which can be a slight inconvenience for few users.
Talking about the monitor itself, the Viewsonic VP2768a looks super sharp due to its 2560 x 1440p QHD native resolution. This monitor has a 27-inch IPS panel that produces accurate and vibrant colors looking ideal for CAD designs. Having said that, if you plan to unwind after a long day of work. In that case, HDR mode is missing in this monitor. Hence, you won’t be able to take full advantage of this monitor’s specs.
This monitor also features SuperClear IPS panel technology, which means it has a reasonably broad viewing angle, and designs will look in their best format. Hence, your colleagues can see your designs from the sides clearly, without being in the dead center of the screen.
When it comes to display performance, the Viewsonic VP2768a performs like a beast. For starters, it covers 100% of the sRGB color space, which means you get an accurate color response. Although, if you plan to use Adobe applications. In that case, this monitor only supports up to 78% of Adobe RGB color space.
In addition, it can produce a whopping 1.09 billion colors due to its 10-bit FRC support panel. For comparison, a regular consumer-grade monitor can only produce up to 16.9 million colors.
- 10-bit FRC panel
- Beautiful yet sturdy design
- Slim bezels on all 4 sides
- Ergonomic adjustments are smooth
- Cover 100% of sRGB and Rec.709 color space
- No HDR support
- Slight IPS bleed issue is present
“The Viewsonic VP2768a is a pocket-friendly and best monitor for AutoCAD. The image reproduction is accurate, plus your designs will look the best compared to any regular monitor.”
3. Asus ProArt PA278QV– Best Affordable
The Asus ProArt PA278QV belongs to the Asus ProArt series, which predominantly targets creative professionals, yet is available at a very affordable price. In terms of specifications, this monitor comes with a 27-inch screen with 2560 x 1440p QHD native resolution. It has an IPS panel offering exceptional color accuracy at an approachable price point.
Out of the box, the Asus ProArt PA278QV is very easy to set up. All you need to do is connect the monitor base with the stand and connect the screen with the stand. The whole setup is very sturdy and well-built. The top, right and left bezels are very slim; however, the bottom bezel is very thick and looks slightly ugly due to control buttons placed right onto the bottom bezel.
In addition, this monitor offers several ergonomic adjustments like height, swivel, tilt, and pivot. Each adjustment is straightforward to execute. You can also effortlessly mount it on a wall or, more preferably, on a monitor arm.
As a testament to the monitor’s performance, each unit of Asus ProArt PA278QV is Calman-verified and factory calibrated before shipping. As a result, the picture quality on this monitor is insane. It covers 100% of the sRGB and Rec.709 color space.
On top of that, it has a Delta E<2 rating, which means there’s hardly any color deviation. However, the biggest disadvantage of the Asus ProArt PA278QV doesn’t support HDR, which can be a deal breaker for few.
Moreover, this monitor has an average contrast ratio of 1000:1, which is typical of an IPS panel. In comparison, a VA panel has up to 3000:1 contrast ratio. The low contrast ratio also affects uniformity; hence you don’t get the deep blacks you crave for.
Connectivity is an essential factor for the best CAD monitors, and this monitor has got plenty of them. You get port options like HDMI, DisplayPort, mini-DisplayPort, DVI-D port, audio in, headphone jack, and a USB hub. With the DVI-D port, you can also connect this monitor with older computer systems, which lack HDMI or DisplayPort connectivity for which you can get a monitor with 2 hdmi ports.
The Asus ProArt PA278QV’s OSD menu is the easiest to get working with. Going around the OSD menu is effortless. You can select between various modes like sRGB, Rec.709, scenery mode, reading mode, darkroom mode, rapid rendering mode, and more. Having said that, this monitor misses out on HDR mode, which could be a deal-breaker for some.
- Accurate colors
- Calman-verified display
- Delta E rating of less than 2
- Sturdy built quality
- 8-way ergonomic adjustments
- IPS glow issue is reasonably noticeable in a dark room
- The enormously thick bottom bezel
“If you want a sub-$300 monitor for computer-aided design work, it’s hard to go wrong with the Asus ProArt PA278QV. This monitor is built to perfection for price; plus, you can take advantage of the low response time for competitive gaming.”
4. Dell Ultrasharp U2719DX– Best Premium AutoCAD Monitor
The Dell Ultrasharp range is probably the first series that started making creative professionals focused monitors. Nowadays, other brands have caught up by offering featured-packed yet lower-priced products. However, Dell Ultrasharp monitors still retain their charm, and an offering like the Dell Ultrasharp U2719DX is irresistible.
For starters, this monitor looks apt in a corporate or business environment. The design looks sleek and won’t warrant unwanted eye glares from a longer distance. After unboxing, this monitor is straightforward to set up. You get a power cable, DisplayPort cable, and a USB Type-B to USB Type-A cable.
In terms of assembly, this monitor is very effortless to assemble, albeit you’ll need ample space to accommodate the longer monitor stand and the panel itself. Once assembled, the Dell Ultrasharp U2719DX looks very minimalist yet sturdy at the same time.
Being a Dell Ultrasharp monitor, it falls in the expensive price range, which can be slightly off putting if you absolutely love this monitor and want to buy it.
Connectivity-wise, you get 1x HDMI port, 1x DisplayPort in, 1x DisplayPort out, 1x USB 3.0 Type-B port, 2x USB 3.0 Type-A port, and a headphone jack. For the price, the connectivity options seem sufficient. You can also daisy chain this monitor to other monitors through the DisplayPort out port.
On the design front, this monitor looks stunning. It has a matte black finish on the front, whereas the back contains a gun-metal-like finish, which gives it the impression that it is a metal-built monitor. Talking about the bezels, they are very sleek on all 4 sides and very similar to Viewsonic VP2768a. The slim bezels on a 27-inch screen offer an impressive experience.
On the performance part, the Dell Ultrasharp U2719DX offers 99% of sRGB and Rec.709 and 85% of DCI color space coverage. As a result, the picture quality is sharp and accurate. On top of that, the viewing angles look stunning, and there’s hardly any color shift. Even with awesome picture quality, this monitor misses out on HDR feature and not justified for the price you pay.
Having said that, this monitor has a low contrast ratio. As a result, it can’t produce deep blacks required in some projection. Moreover, it also affects uniformity, which can be a concern for few users.
Dell also offers a Premium Panel Guarantee, which means Dell will offer a free panel replacement during the limited hardware warranty. Due to this, even if there’s one dead pixel in the panel, Dell will replace the entire panel for free.
- Extremely slim bezels on all 4 sides
- Stunning built quality and design
- OSD menu is easy to navigate
- Supports sRGB, Rec.709, and DCI-P3 color space
- Picture quality is incredibly sharp and crisp
- This panel has a minor yellowish tint out of the box
- Slightly expensive for a 27-inch QHD panel
“The Dell Ultrasharp U2719DX is an incredible color-accurate monitor and ideal for CAD work. The 4-side slim bezels give this monitor an immersive feel. In contrast, the built quality and design choice make you fall in love with this monitor instantly.”
5. LG 27UN850– Best 4k Monitor
The LG 27UN850-W is a 27-inch 4K monitor with a superb pixel density of 163 PPI. The high pixel density means text will look crisp, and photos will look incredibly sharp. In contrast, CAD renders will not look pixelated compared to other budget monitors.
On top of that, it has an IPS panel that offers a wide viewing angle, color accuracy, and fantastic vibrancy. The LG 27UN850-W comes with 99% sRGB color space coverage, which means colors look accurate and true to life. Having said that, this monitor is targeted towards all-around usage; hence if you want an apt-sized productivity monitor, then you’ll love the LG 27UN850-W.
It has a maximum brightness of 350 nits, and besides that, this monitor is also VESA DisplayHDR 400 certified. Accordingly, this monitor offers exceptional picture quality in HDR mode. As a result, watching movies and TV shows will be a joy.
LG also provides an OnScreen Control application, which allows you to control brightness, contrast, color calibration, and more. Thus, you don’t have to fiddle with the OSD menu and continuously press the joystick controls. With this application, you can also select the screen split option.
With it, you can split the large 27-inch screen into two or three parts of various sizes. This feature makes it easy to work with your CAD application in a larger window and other productivity work in a smaller window. However, swivel adjustment is missing on this monitor, which makes it slightly difficult incase you want to show the screen to your client or colleague.
Using the OnScreen control application, you can also control which picture mode to use for what application. For example, you can configure the application to open Photoshop in sRGB mode. Having said that, it doesn’t work correctly at all times and is slightly buggy in our usage.
On the other hand, you can set AutoCAD to open in Rec.709 picture mode. In accordance, you can also set your custom calibration for different software and applications on your system. As a result, you don’t have to manually keep changing the mode whenever you open a specific application.
Once you’re done working, you get to use the LG 27UN850-W for casual gaming too. The 60Hz panel might feel low for competitive gamers; however, most games work just fine, and you’ll love the fantastic color output on this monitor.
- High pixel density
- Joystick for controlling OSD menu
- The onScreen application makes it very easy to control various settings and features
- VESA DisplayHDR 400 certified
- FreeSync support
- No swivel adjustment
- Poor quality built-in features
“If you want an all-rounder monitor to use for AutoCAD, productivity, entertainment, and casual gaming, then the LG 27UN850-W is meant just for that. You get tons of features, and the OnScreen application makes controlling this monitor stress-free.”
6. Philips 276E8VJSB– Low-Cost 4K monitor
The Philips 276E8VJSB is, possibly, the most affordable 27-inch 4K monitor available in the market. Other than that, it’s also the best-looking monitor having a minimalist design and looks super sleek.
For an affordable price, this monitor can output a whopping 1.07 billion colors due to its 10-bit color depth (8-bit + FRC). Although, the lower price also eliminates options like ergonomic adjustments and VESA mount support. You get very basic -5 to 20 tilt adjustments, and that’s it. Having said that, the monitor stand and base are very thin and carry forward the monitor’s minimalist look.
This monitor has an entirely black design, but the rear panel has a glossy finish, making it a dust and fingerprint magnet. The back also sports connectivity options like 2x HDMI ports, 1x DisplayPort, and a headphone jack. However, USB ports are missing, which is a deal breaker for few users.
The Philips 276E8VJSB has an IPS panel that produces vibrant colors. The 4K resolution on a 27-inch panel also makes text look crisp, and the images look sharp. On the design front, the monitor bezels look very slim, and the implementation of the Philips logo looks unique. The Philips logo is placed on a glass plaque attached to the bottom bezel. At times, the logo almost seems like it is floating in the air.
Again, for a lower price, this monitor comes with 350 nits brightness; however, HDR mode is missing, and I don’t think it’s a deal-breaker at this price. Another downside to this monitor is the lack of FreeSync support or any Adaptive Sync. Hence, gaming can be a bit cumbersome because FreeSync eliminates screen tearing issues. Screen tearing is a much bigger issue than the 60Hz refresh rate on this monitor.
The OSD menu in Philips 276E8VJSB looks very basic. You can control the OSD menu through joystick control, which is better to use than individual buttons. You can access picture-in-picture, picture-by-picture, viewing modes, 4 levels of blue light filter, and 5 levels of gamma presets.
- Sleek Design
- 4KIPS panel at an affordable price
- High brightness
- Offers PIP and PBP features
- 4-levels of blue light filter
- No VESA mounts
- No FreeSync support
“For a low price, the Philips 276E8VJSB offers incredible features like 4K IPS panel, 10-bit color depth, and an ultra-sleek design. However, there are few downsides like no FreeSync support, VESA mount, and HDR.”
7. Aorus FI25F– Best Gaming Monitor for AutoCAD
The Aorus FI25F is a significant departure from other monitors featured in our list of best monitors for AutoCAD. More specifically, it is a premium gaming monitor that you can use for CAD work.
For example, suppose you want a high-performing gaming monitor that you can use for AutoCAD and Solidwork applications. In that case, the Aorus FI25F will be right for you. It’s because this monitor comes with 100% sRGB color space coverage, which means you’ll get accurate colors while using CAD applications along with gaming.
On the design front, the Aorus FI25F is a significant departure from the sleek monitors we’ve seen previously. It looks chunky from all sides and the serious gaming monitor looks might be off putting for a lot of users. The monitor stand and base overshadow the monitor panel from the sides. The RGB lighting gives it a unique and premium feel.
This monitor’s most significant selling point is the 240Hz refresh rate, which works comfortably on this 25-inch monitor with 1920 x 1080p native resolution. On top of that, it comes with an IPS panel that promises a whopping 1ms response time, which takes the stakes even further. This monitor offers 400 nits brightness and supports HDR; however, the HDR performance is average.
Having said that, most of the money you pay goes into the monitor’s design and built quality. The build is exceptionally solid, and the metal monitor base keeps it very sturdy and offers the required rigidity. The rigid built quality also makes this monitor very heavy, which can be problematic for most users.
The monitor’s back and stand offer RGB lighting, which you can effortlessly customize as per your liking. However, you won’t be able to view it directly. In terms of connectivity, the Aorus FI25F offers 1x DisplayPort 1.2, 2x HDMI 2.0 ports, and 2x USB 3.0 ports.
The Aorus FI25F’s OSD menu is feature-packed, and there are many options you can control through it. The overall orange theme of the OSD menu might not be everyone’s liking. Being a gaming monitor, you get several gaming-specific features like aiming point, game timer, aim stabilizer, and more.
- 1ms response time supports
- 240Hz refresh rate
- Superb built-quality
- FreeSync and G-Sync support
- RGB lighting on the monitor’s back and stand
- Offers 100% sRGB color space coverage
- Very heavy for a 25-inch monitor
- Average HDR performance
“The Aorus FI25F is a unique take on the best monitor for AutoCAD. If you’re an ardent gamer, you can easily do work and pleasure through the same monitor. Moreover, this monitor offers tons of gaming-specific features and functions.”
Things to Consider Before Buying Best Monitor for AutoCAD
Screen Size & Resolution: With AutoCAD, you’ll be working with complex and bigger designs. As a result, you’ll need a bigger screen to view your designs effortlessly. On top of that, a high-resolution monitor ensures you see your designs and text with the highest sharpness.
For example, if you’re choosing a 27-inch monitor, it is crucial to pick one with QHD or 4K resolution. You’ll get a higher pixel density with either resolution than Full HD resolution, which offers a measly ~80ppi of pixel density.
Color Performance: While color accuracy isn’t a top priority when choosing a CAD monitor; however, monitors meant for creative professionals are factory calibrated and use the best panel. As a result, the image quality will be sharp, and working on the monitor will be joyful.
Eye-Care Technology: It’s hard to keep note of time when you’re working on AutoCAD or any CAD software for that matter. Using the monitor for such a long time can be damaging to your eyes. Hence, eye-care technology goes a long way in reducing eye fatigue and strain to your eyes.
The monitors mentioned above come with a few eye-care technologies like a blue light filter, flicker-free technology, ambient light sensor, and auto screen dimming.
Frequently Asked Questions
What type of monitor is best for AutoCAD?
AutoCAD, as the name suggests, is a computer aided design software. As a result, a monitor with a sharp display, accurate colors, and several ergonomic adjustments will be the right fit.
What resolution is best for AutoCAD?
On the AutoCAD website, 1920 x 1080p is the minimum required resolution. However, the company suggests that 3840 x 2160p is the recommended resolution. It’s because the 4K display offers a sharp display, which helps see intricate and small details very clearly.
How to measure monitor screen size for AutoCAD?
A monitor screen size is measured diagonally, from the top left corner to the bottom right corner. The most popular screen sizes for AutoCAD are 24″, 27″, and 32″.
Is a curved monitor good for AutoCAD?
A curved monitor offers better immersion compared to a non-curved monitor. Moreover, if you have a bigger monitor, a curved monitor is much better for seeing content from end to end. Having said that, not all people might be comfortable using a curved monitor, and it all boils down to personal preference.
I hope this article helped you in choosing the best monitor for AutoCAD work. If you’re still confused about which monitor to choose, I’d suggest going with the #1 pick, i.e., the BenQ PD2700U. It’s because this monitor offers a 4K IPS panel within a 27-inch screen, HDR support, and exceptional picture quality.
If budget is your main concern, then you’ll surely love the Asus ProArt PA278QV due to its focus on graphic designers and CAD/CAM designers.
Other than that, if you want a sophisticated-looking monitor ideal for business or corporate environments, there isn’t a better monitor available than the Dell Ultrasharp U2719DX. Also, before you go, check out our recommendation of best computer monitor for music production!