My FireStick won t turn on (simple solutions)

Fire Stick is 1 of the multiple widespread streaming platforms in the nation, and it produces meaning – it’s a fantastic development. But, like any technology, it has its allocation of issues. One such common issue is that the FireStick won’t turn on. Fortunately, there are some tried and true solutions that you may attempt.

If you adhere to this inventory and operate via each decision one after the other, it is extremely possible that you will decide your issue. Don’t miss a stage, considering it’s too clear or won’t job!

My FireStick won t turn on: Top Simple solutions

What are the reasons FireStick won’t turn on?

Foremost of all, we suggest a clever resolution with which this issue will be cracked in minutes:

If your FireStick won’t turn on, unplug the power cord, pause for 10 seconds, and then turn it on ago.

Further, click Settings, choose the Device possibility, Restart from the Fire TV menu, and Pause. Behind that, the system begins operating.

Now we are also putting other measures in front of you to fix this problem as soon as possible, which is very important for you to know.

Restart your modem or router

Your router or modem is not working properly, and as a result, your flash drive is not working properly.

  • Disconnect all power cables from your device.
  • After that, wait 60 seconds.
  • Now it’s time to reconnect the power cables.
  • This way your router gets a web connection and after all kinds of testing, the problem related to the router is solved.

Check all your connections again

In charge of the Fire TV Stick to operate smoothly, you ought to double-check the other kinds of connections.

Recheck the linkage also guarantees that your appliance will now operate perfectly.

If for some cause there are any breaks in this hookup, you can prevent them step by step. If the linkage is damaged someplace, you can substitute it with a new connection.

Disconnect the Fire Stick from the power supply

This step also seems so obvious that it’s often overlooked, but in my experience, this most often solves the problem.

Fire Stick can be powered in two ways. First, plug Fire Stick directly into a wall power outlet, and second, plug it into a USB port on your TV.

Start by simply unplugging the Fire Stick from the wall or back of your TV, depending on your setup.

Hard reboot Fire TV

A hard reset will remove any cache files stored on the TV, and you’ll be done.

  • First of all, make sure the TV is turned on.
  • Unplug the TV from the socket. After that, unplug the Fire Stick from the HDMI port on the TV.
  • Press and hold the power button on the TV for 30-40 seconds.
  • Connect the Fire Stick to the HDMI port again, and then plug the TV into a power outlet.
  • You can now turn on your TV by carefully selecting the correct HDMI input channel for the Fire Stick.

Problems with external FireStick audio speakers

If your FireStick won’t turn on, the sound issue is likely related to the device. You will need to review the settings and then make the necessary changes, namely.

If you think your external speakers are not working with your Fire Stick input channel, you need to reset your audio settings to default.

If the sound settings on your Fire Stick were locked or if it was done automatically.

  • To enable Dolby Digital Output, navigate to the settings option and select it.
  • If you think your external speaker is working properly, you can test it by connecting it to another device.
  • If you think everything is in order, you should replace your Fire Stick immediately.
  • Check if the issue of the FireStick not turning on is resolved.

Turn your TV off and on again

While your FireStick is still unplugged, your TV is too. So if your TV is plugged into an outlet, etc., just unplug it.

This next step is KEY – leave the FireStick and TV unplugged for 60 FULL seconds.

And while you’re waiting, press and hold the power button on your TV for 15 seconds. This will also reset your TV by draining the residual power from your TV’s capacitors.

After the full minute has elapsed, first plug your TV back in and let it boot up completely before plugging the FireStick back in.

Internet connections problems

Your FireStick may not work due to Internet connection issues. This problem is common. The FireStick requires Internet connections to work, so any disturbance to the linkage will force the appliance to prevent performing.

Fixing this error is quite simple. Preferably, review if there are functional Internet connections. On the main screen, go to “Settings” and select “Network”.

Press the play/pause button on the TV remote control while on the Internet to view the connection status and make sure the connection is active.The following action is to part and re-establish a connection to the Internet. This is an easy scheme that will probably decide the issue.

You may do this by heading to Settings – Network and then choosing your network. Then press the options to switch on the FireStick remote control and select the option that ignores the network.

If you forget a network, choose it from the inventory of obtainable networks to establish a new connection. Enter your Internet password when prompted.

If forgetting and reconnecting to the network does not solve the problem, you can reset your Wi-Fi router. To reset your router, simply unplug the power cord.

Wait about half a minute, and then reconnect the power cord. Let the router run for a few minutes while it reboots, then try connecting the FireStick to the internet again.

If you regularly experience internet problems on your FireStick, the signal from your router may not be reaching your FireStick at full strength.

Try moving the router and FireStick closer together and clearing a physical path between them. Also, make sure your FireStick or Fire TV device is not near enclosed spaces.

Small spaces such as closets can block the Wi-Fi signal and cause connection issues.

Finally, large glass or metal surfaces around or in between your router or FireStick can deflect Wi-Fi signals, so check for these obstructions and move them if possible.

Have you changed the cables that came with your FireStick with your cables? Sometimes other cables cause compatibility issues.

You may actually be able to fix your problem by going back to the original FireStick cables.

Internet connection problems can also occur due to compatibility issues with modems or routers that are several years old.

If you’re constantly having trouble connecting to your FireStick and can’t resolve it, the problem might be with your old router or modem.

Since replacing it will be an investment, this should be your last resort.

Check all connections

When you find that your Amazon FireStick won’t turn on your network, you’ll need a network usage tool to see what kind of connection you have.

To obtain the instrument, you must move to “Settings” to choose “Network” from the TV’s menu before pushing the “Play” or “Pause” switch that is on your TV’s remote control.

This instrument stems your flash drive and attempts to select an excellent wireless connection, and informs you that there are no more mistakes on your device.

Make sure you are using the correct input

Now that your FireStick and your TV have been reset, double-check that you are at the correct “input”.

To do this, look at the back of your TV and locate the HDMI port your FireStick is connected to.

Above the HDMI connection, there should be a label or something on your TV indicating which HDMI port your FireStick is connected to.

Notice the number. In the example above, this is “HDMI 2”. Then take the TV remote, NOT the FireStick remote, and press SOURCE (or ENTER).

You will most likely have to switch this several times until you find the appropriate input on your TV. Once it matches, your FireStick should work again!

Problem with physical connection

The Amazon FireStick will not turn on from the remote. You must choose an HDMI port hub due to the lack of a physical connection.

Since a low battery can cause connection problems, you should replace the remote control battery if it is not getting enough power.

The physical connection should be checked regularly. When your TV cannot detect the flash drive, you will get a physical error message.

You will need to double-check that your Fire Stick is connected to the correct HDMI cable and that the connections are secure. Check if the issue of the FireStick not turning on is resolved.

Try FireStick on another TV

You may attempt to tune up the FireStick with different TV in your house. Behind that, it is famous whether the issue of non-inclusion of the FireStick is cracked or not.

If you don’t have a different TV at the house, you may verify FireStick reconcilability. In such a case, you may enroll the support of your friends and neighbors.

You may try your appliance on their TV. As soon as you obtain an expression that the FireStick is operating on this TV but not on your TV, you may check your TV.

Check the power adapter and HDMI cable

If the solutions above didn’t work for you, it’s possible that the TV isn’t working properly at all. This is where the power adapter or power cord you use come into play.

The power adapter can usually fail, or the cable can be damaged fairly easily, causing it to stop working properly.

When this happens, the device will naturally stop working. Therefore, you will have to check the power adapter or power cord you are using and make sure it is secure.

You can even get a working power adapter and try it out to see if that solves the problem.

Also, the TV HDMI ports that are used to connect the Amazon Fire Stick to the TV can cause any issues per se. If the cable is loose or damaged, you won’t get any input power source, and as a result, the FireStick won’t turn on. Thus, be sure to check this along with your power adapter to really narrow down the root cause of the issue.

Check FireStick settings

The first step is to double-check your FireStick settings to make sure everything is working properly. While it may seem self-evident, an unresponsive device in one HDMI port on your TV may work in another.

If you only have one port, and you’re sure it’s working, try touching the connector and see what happens. You should also double-check if the gadget is turned on.If it doesn’t have sufficient power, you need to plug it into a wall outlet or an extension cord. In order for the gadget to receive enough power, use the original power adapter.

While it may be tempting to use a free USB port on a TV as a power source, USB connections rarely provide enough power to keep the FireStick running. The device may not turn on at first, and if it does, random boot loops or restarts are possible.

FireStick overheating

FireStick devices usually don’t experience overheating issues. In fact, most of them don’t have this problem. But those devices, that have such an issue, often overheat. The FireStick can be permanently damaged if it is overheated too many times. If this happens, there is no other option but to buy a new device.

Even if your FireStick doesn’t burn out completely, overheating negatively impacts performance, leading to issues like slow booting, connection issues, and freezing.

If your device is overheating, you can unplug it and let it cool down for a few minutes before plugging it back in. Disconnecting from the network turns off the device and allows it to update. Other options are clearing cache and data in large apps, or force closing apps, so they don’t run in the background.

So, when your problem is solved you can share files on FireStick, did you know it? If you don’t know then you can check a guide on sending files to FireStick.


How do you fix a dead Fire Stick?

Restart your Fire TV Stick. Your Fire TV Stick doesn’t have a power button, but you can turn it off and on again by unplugging it from the power source for at least three seconds and then plugging it back in. This usually fixes the Fire TV Stick’s immunity.

Why did my Fire Stick remote stopped working?

Incorrectly inserted batteries, low batteries, and other related issues can cause your Amazon Fire TV Stick remote control to stop working. Your remote is not paired with the Amazon Fire TV Stick and will not work. Replacement remote controls must always be paired before being used.

What to do if FireStick won’t start?

Linger for the loading screen to occur, reboot your Amazon Fire TV, ride up your Wi-Fi cue, and create certain your HDMI connection is in fine operating charge.

Do Amazon Fire Stick devices wear out?

Yes, it is. Like all devices, your Fire TV Stick will wear out over time, leading to new problems. The good news is that it usually takes quite a long time. The FireStick is a long-lasting device, and you will likely be using it for several years before wear and tear start to cause problems.

How to enable the FireStick device?

You need to connect the USB port to the power adapter and then connect the FireStick to the HDMI port. Directly push the pause and play buttons with the right language and verify the Internet connections.

What does it mean if your FireStick won’t turn on?

It just implies that you cannot operate this appliance correctly. You may obtain the support of the technical team, after which all your issues will be solved.

Why does my Fire TV Stick have a black screen?

An Amazon Fire Stick with a black screen or no image is often the result of selecting the wrong HDMI connection input on the TV. If the TV shows a no signal message, try selecting a different HDMI source using the Enter or Source button on the TV remote.

Another common cause is that the device does not have enough power to operate properly or turn on properly. Ideally, it would be better to plug the Fire TV Stick directly into the wall. Power adapters and surge protectors can affect the stability of multimedia devices such as streaming flash drives.

The Fire Stick’s black screen, and not working problem can be frustrating, but there is often a simple solution that can fix it.

Why won’t my Amazon Fire Stick turn on my Samsung TV?

If your Samsung TV has several HDMI ports, try changing between them. Create certain the full stature of the cord is not injured.

Why won’t my Fire Stick turn on my LG TV?

If your LG TV still doesn’t identify the Fire TV Stick, after troubleshooting the power supply and any different peripherals, create certain the appliance is completely intercalary into the TV’s HDMI port.

Final thoughts

In this way, with the aid of the above explanation, you may fast correct the Fire TV Stick. If you experience this issue, over and over, it is so essential to obtain an answer for which the technical support team may test the whole appliance in a talk. You likewise require reviewing the linkage if the FireStick won’t turn on.

Read also: Detailed Installation Guide: How to install RedBox on FireStick

Recent Posts